NZ Pump Blog

Introducing Tracey Raworth
We are pleased to announce the addition of Tracey Raworth to the sales team at New Zealand Pump Company (Europe) Ltd.  Tracey's position is Sales and Business...
Ezi-action Drumpump - For Essential Services
Ezi-action® Drumpumps assist with maintaining Essential Services. Ezi-action® Drumpumps were exhibited by Obart Pumps Ltd at the Pump Centre Conference and...
View All >

Frequently Asked Questions

Review below common questions about this excellent fluid transfer drum pump and the Ezi-action® accessories that enhance longevity and safety in fluid transfer.

Reliability, durability, safety, 24 month manufacturer’s warranty and full serviceability differentiate the Ezi-action® Drumpumps. You can be confident that Ezi-action® Drumpumps are supplied by a company that believes in giving the customer more than they expect.

Read more

Ezi-action® Drumpumps are fully serviceable. This differentiates them from other hand drum pumps on the market. Servicing may never be required. But some chemicals can be harsher on the polyethylene components. Should pumping cease or fluid be visible on the plunger shaft the Ezi-action® Drumpump is easily serviced.

Learn more.

Ezi-action® Drumpump seals are made from LDPE plastic which has excellent chemical resistance and are well proven.

The addition of an OR -116 Brown Viton O ring above the LDPE seals on the plunger shaft can be beneficial when the Ezi-action® Drumpump is being used to pump large volumes. It can also be useful when there is an increase in back pressure because the pump is being used to pump fluids against gravity or when the fluids are very viscous.

OR-116 Brown Viton O rings can be bought locally or we can supply them if you prefer.

Learn more about Ezi-action® Drumpump seal options and accessories to improve safety and longevity.

The unique safety measure spout uses a bayonet fit to secure the one litre Ezi-action® Safety Measure bottle to the Ezi-action® Drumpump.

Click here to learn more about the Ezi-action® Safety Measure

 

It is recommended that drums of chemical be securely sealed when not in use.

It is recommended that the Ezi-action® Drumpump be removed from the drum between uses and the contents securely sealed.

Care must be taken when removing the Ezi-action® Drumpump. Follow instructions provided.

 

The range of liquid products being dispensed with Ezi-action® Drummpumps expands all the time. Ezi-action® Drumpumps will pump the harshest chemicals as well as liquid foods. If it is fluid even if viscous or containing mild solvents it can be pumped. Ezi-action® Drummpumps meet EU standards and are made from FDA compliant plastics and will not contaminate your fluids.

 

Due to the revolutionary but incredibly simple pumping principle, Ezi-action® Drumpumps will pump viscous products including molasses and oil to 8,800cps.

Ezi-action® Drumpumps are proven to pump strong acids. They are being used to pump cleaning acids,  hydrocholoric acid, AdBlue, battery acid (35% sulphuric acid), formic acid,  formalin, farm acids, peracetic acid, propionic acid, phosphoric acid, nitric acid, acetic acid and more.

 

It is not recommended that the Ezi-action® Drumpump be used in strong solvents, petrol or flammable liquids.

Chemicals containing mild solvents are pumped with Ezi-action® Drumpumps. The concentration of the solvent and the length of time the drum pump is left in the container will determine longevity.

 

 

There is an Ezi-action® Adaptor Fitting to secure and lock the Ezi-action® Drumpump into every common thread configuration for bulk containers with at least a 42mm opening. 

 

 

Yes. The Ezi-action® Drumpump will act as a siphon pump. However it will only siphon when a long hose is fitted and providing the source of the fluid is higher in elevation than the receptacle.

Do you want to prevent accidental siphoning?
Click here to read about the Ezi-action® Non-Siphon Check Valve.

Yes. If a long hose is fitted and siphoning is not desired this can be easily managed.

To break the siphon air needs to enter the hose, the hose needs to be crimped and/or the hose needs to be stored higher than the contents of the drum.

When the Ezi-action® Drumpump is not in use removal of the long hose or removal of the Ezi-action® Drumump from the drum will prevent unintentional siphoning.

For extra safety install an Ezi-action® Non-Siphon Check Valve in your hose.  This will prevent accidental siphoning as it permits air to enter the hose.

Learn more about the Ezi-action® Non-Siphon Check Valve Kit.

All Ezi-action® hand pumps incorporate the same patented pumping principle.
They are ingeniously simple, direct, double action, low pressure, high volume pumps.

Ezi-action® hand pumps do not use a conventional piston so there are no close fitting mechanical seals to wear.

 

 

The Ezi-action® Powder Measure is adjustable and allows excess powder to be gently shaken away from the user. It is another excellent marketing tool adding value to powders and is valued by responsible businesses to prevent wastage and overuse.

Read more

View Sitemap

Back to Top